Interactive demo · about 3 min

Sync

Sync your files between any two storages

See how RcloneView keeps any two locations in step — cloud-to-cloud, local-to-cloud or local-to-local. Set up a sync job, preview the changes, and run it.

  • Create sync jobs between any two remotes, cloud or local
  • Sync one source to multiple destinations (1:N)
  • Schedule recurring syncs with RcloneView Plus
Open in new tab ↗

Watch next

See all demos →

Step-by-step guide

How to sync files between two storages

The same 30 steps as the interactive demo, with screenshots — skim it, or jump into the demo at any step.

  1. 1

    Open the Wizard for a guided setup.

    We begin on the RcloneView home screen. Click Wizard to open the guided setup.

    Try this step ↗
    Step 1: Open the Wizard for a guided setup.
  2. 2

    Sync mirrors a folder: the destination ends up identical to the source.

    The wizard handles several kinds of steps. Choose Sync, mirror directories. Mirroring means the destination is made identical to the source, so anything that exists only at the destination is removed. Keep that in mind, because we will see it happen.

    Try this step ↗
    Step 2: Sync mirrors a folder: the destination ends up identical to the source.
  3. 3

    Pick the cloud that will hold the mirror. More than eighty providers are supported.

    First we add a remote to sync with. RcloneView supports more than eighty storage backends, and any of them can be a source or a destination. For this demo we will use Google Drive.

    Try this step ↗
    Step 3: Pick the cloud that will hold the mirror. More than eighty providers are supported.
  4. 4

    Provider chosen. Next you name the connection and authorize it.

    With the provider selected, click Next.

    Try this step ↗
    Step 4: Provider chosen. Next you name the connection and authorize it.
  5. 5

    Give this connection a short name you will recognize later.

    Give the new remote a short name you will recognize later. It is only a label for the connection, and you will see it everywhere in RcloneView.

    Try this step ↗
    Step 5: Give this connection a short name you will recognize later.
  6. 6

    The name you type here is how this cloud appears everywhere in RcloneView.

    We will call ours my google drive. Click Next to save it and start the connection test.

    Try this step ↗
    Step 6: The name you type here is how this cloud appears everywhere in RcloneView.
  7. 7

    Continue, and RcloneView hands you to the provider's own sign in page.

    Click Next. RcloneView now opens the sign in page hosted by the provider, right in your browser.

    Try this step ↗
    Step 7: Continue, and RcloneView hands you to the provider's own sign in page.
  8. 8

    Sign in at Google. Your password goes to Google, never to RcloneView.

    Sign in with the account that owns the storage. This page belongs to Google, so your password is never seen by RcloneView. The app receives only an access token, and that token is stored on this computer.

    Try this step ↗
    Step 8: Sign in at Google. Your password goes to Google, never to RcloneView.
  9. 9

    The remote works. Click "Next"

    RcloneView tests the new remote straight away. Connect, authenticate, and list root all pass, so the connection is ready to use.

    Try this step ↗
    Step 9: The remote works. Click "Next"
  10. 10

    Choose the side to mirror from. Sync never modifies the source.

    Now we choose the source, the side that will be read from. Sync only ever modifies the destination, so the source is never changed. Here we pick Local Disk C.

    Try this step ↗
    Step 10: Choose the side to mirror from. Sync never modifies the source.
  11. 11

    Pick the exact folder to mirror. Everything under it travels with it.

    Browse to the folder you want mirrored. We will use the My Pictures folder, and everything inside it, including the Adtech subfolder, is part of the job.

    Try this step ↗
    Step 11: Pick the exact folder to mirror. Everything under it travels with it.
  12. 12

    Source set. Next you choose where the mirror will live.

    With the source folder set, click Next.

    Try this step ↗
    Step 12: Source set. Next you choose where the mirror will live.
  13. 13

    The destination is the only side sync will modify.

    Now the destination. This is the only side that sync will change, so choose it carefully. We will use the Google Drive remote we created a moment ago.

    Try this step ↗
    Step 13: The destination is the only side sync will modify.
  14. 14

    Use a folder made just for this job. Sync only touches what is inside it.

    We choose a folder called My Pictures Sync. Sync only changes what is inside that folder. Everything else in your Drive stays safe.

    Try this step ↗
    Step 14: Use a folder made just for this job. Sync only touches what is inside it.
  15. 15

    Both sides are set. Next you can narrow what gets processed.

    Click Next.

    Try this step ↗
    Step 15: Both sides are set. Next you can narrow what gets processed.
  16. 16

    The default options are fine and Click "Next"

    Filters are optional. You can skip files over a certain size, files older than a certain age, or folders deeper than a set level. The recommended defaults are fine here, so click Next.

    Try this step ↗
    Step 16: The default options are fine and Click "Next"
  17. 17

    A dry run. This is what would happen, nothing has been written yet.

    Before anything moves, RcloneView shows a dry run. Every line here is a simulation. The files from the Adtech folder are listed to copy, and so far nothing at all has been written to Google Drive.

    Try this step ↗
    Step 17: A dry run. This is what would happen, nothing has been written yet.
  18. 18

    One delete: sync removes whatever the source does not have. Click "Execute"

    Scroll to the bottom and the difference between sync and backup is right there. Thirty three files to copy, zero to skip, and one to delete. That file exists only in the cloud folder, so mirroring takes it away. If you would rather keep what is already at the destination, use Backup instead, which is a one way copy and never deletes. This preview is your chance to check that before anything happens. Click Execute to run it for real.

    Try this step ↗
    Step 18: One delete: sync removes whatever the source does not have. Click "Execute"
  19. 19

    The sync has started, and the whole setup was saved as a job. Click "Open Job Manager"

    The sync is running, and the setup you just walked through was saved automatically as a job. You never have to repeat these steps. Open Job Manager to see it.

    Try this step ↗
    Step 19: The sync has started, and the whole setup was saved as a job. Click "Open Job Manager"
  20. 20

    Your new sync job, ready to run again whenever you need it.

    Here it is in the job list, recorded as a sync from the My Pictures folder to My Pictures Sync.

    Try this step ↗
    Step 20: Your new sync job, ready to run again whenever you need it.
  21. 21

    The Transfer panel follows the job file by file.

    The Transfer panel tracks the job as it runs, with progress, speed and time remaining. Each file is marked success the moment it lands.

    Try this step ↗
    Step 21: The Transfer panel follows the job file by file.
  22. 22

    Open the destination remote and check the result yourself.

    Once the job finishes, open the Google Drive remote and look at the result yourself rather than trusting the progress bar alone.

    Try this step ↗
    Step 22: Open the destination remote and check the result yourself.
  23. 23

    My Pictures Sync now exists in the cloud, created by the job.

    The My Pictures Sync folder is now in Drive, created by the sync itself. Open it to see what arrived.

    Try this step ↗
    Step 23: My Pictures Sync now exists in the cloud, created by the job.
  24. 24

    Same thirty three files, same total size, on both sides.

    Source on the left, destination on the right. Thirty three files and forty point four megabytes on each side, and the file that lived only in the cloud is gone. That is what mirroring means.

    Try this step ↗
    Step 24: Same thirty three files, same total size, on both sides.
  25. 25

    Reopen Job Manager to reuse the job instead of rebuilding it.

    Now for the part that saves time later. Open Job Manager again.

    Try this step ↗
    Step 25: Reopen Job Manager to reuse the job instead of rebuilding it.
  26. 26

    The same job, now with a last execution time recorded.

    The sync job is still here, and it now shows when it last ran. Select it to work with it.

    Try this step ↗
    Step 26: The same job, now with a last execution time recorded.
  27. 27

    Run repeats the whole mirror in one click. Dry run previews it first.

    This is the payoff. One click on Run repeats the entire mirror. Only new and changed files move, and anything you removed from the source is removed from the cloud as well. Dry run shows you that in advance, and Edit Job lets you change the paths.

    Try this step ↗
    Step 27: Run repeats the whole mirror in one click. Dry run previews it first.
  28. 28

    Compare checks any two folders against each other, file by file.

    Finally, let us prove the mirror is exact. Compare checks any two folders against each other, file by file, whichever remotes they sit on. Click Compare.

    Try this step ↗
    Step 28: Compare checks any two folders against each other, file by file.
  29. 29

    Zero left only, zero right only, zero different, thirty three identical.

    Here is the proof. The two folders match exactly, which is precisely what sync set out to do.

    Try this step ↗
    Step 29: Zero left only, zero right only, zero different, thirty three identical.
  30. 30

    Every row lines up, same size and same timestamp on both sides.

    The detailed view shows the same thing row by row. Every file appears on both sides with the same size and the same modification time, and the totals agree. Zero folders, thirty three files, forty point four megabytes on each side.

    Try this step ↗
    Step 30: Every row lines up, same size and same timestamp on both sides.
  31. Ready to try it yourself?Free for Windows, macOS and Linux.
    Get RcloneView Free